1/ Overview
RSPro Production Series
A New Dimension in Stereolithography 3D Printing
- Cost-effective ownership throughout entire life cycle.
- Freedom to collaborate and innovate: open design for materials and machine access.
- Printed parts demonstrate excellent sidewall quality and fine detail, contributing to lower post-finishing requirements.
System Features
- Scanning speed can reach 15m/s.
- Key components from international top brands, Panasonic of Japan, Optowave/ Spectra-Physics of America/ Germany, Scanlab of Germany.
- Automatic control of surface level and processing parameters.
- Granite recoater frame for enhanced recoating stability.
- Closed loop control strategy for: Platform movement/ Laser power/ Material level/ Temperature/ Vacuum
- CE certification.
- Convenient assembly and disassembly of platform.
Versatile Application Range – High Accuracy – Excellent Surface Aesthetics
2/ Technical Data
| Technical Data: *Specifications are subject to change; consult with your sales representative for confirmation of current offering | |
| Build Envelope Capacity | 23.6 x 23.6 x 19.7 in
(600 x 600 x 500 mm) |
| Maximum Part Weight | 169.8 Ib (77 kg) |
| Accuracy | Part size <3.9 in (100 mm): ±0.004 in (±0.1 mm)
Part size ≥3.9 in (100 mm): ±0.1% x L (Accuracy may vary depending on parameters, part geometry and size, pre-processing or post-processing methods, materials and environment) |
| Beam Size | Nominal 0.005 – 0.008 in (0.12-0.20mm) |
| Scanning Speed | 15 m/s (Maximum); 6 – 10m/s (Typical) |
| Layer Thickness | 0.002 in (0.05 mm) minimum;
0.01 in (0.25mm) maximum |
| Weight | 3968 Ib (1800kg)
(with 728Ib (330kg) initial fill inside) |
| Machine Size (WxDxH) | 62.9 x 63.5 x 83.5 in
1598 x 1612 x 2121mm |
PILOT 600/800:
| Laser | Solid-state frequency tripled Nd: YVO4 |
| Wavelength | 355nm |
| Controller | UnionTech™ RSCON |
| Part Preparation | Materialise Magics |
| Operating Systems | Window 7, Window 10* |
| Input Data File Format | STL |
| Network Type and Protocol | Ethernet, IEEE 802.3 using TCP/IP and NFS |
| Electrical Requirements | 200 – 240 VAC, 50-60 Hz, single phase |
| Laser Warranty | 5,000 hours or 15 months (whichever comes first) |
| Recoater Frame | Granite |
| Systems control | Closed-loop |
| Power (nominal) | Typically 300~800 mW (@100kHz) on the target surface of the material under nominal optical path condition |
| Operating Environment | |
| Temperature Range | 72 – 79°F (22 – 26°C) |
| Maximum Change Rate | 1°C/hour |
| Relative Humidity | <40% non-condensing |
| Accessories | |
| Platform Change Carts | Manual offload cart (optional) |
| Processing and Finishing | Post-Curing Unit (optional) |
| System Warranty | One-year warranty (Under UnionTech’s Purchase Terms and Conditions) |