Pilot Commercial Series

1/ Overview

PILOT Commercial Series

A New Dimension in Stereolithography 3D Printing

  • Cost-effective ownership throughout entire life cycle.
  • Freedom to collaborate and innovate: open design for materials and machine access.
  • Printed parts demonstrate excellent sidewall quality and fine detail, contributing to lower post-finishing requirements.

System Features

  • Scanning speed can reach 12m/s.
  • Key components from international top brand.
  • Automatic control of surface level and processing parameters.
  • Granite recoater frame for enhanced recoating stability.
  • CE certification.
  • Convenient assembly and disassembly of platform.

Versatile Application Range – High Accuracy – Excellent Surface Aesthetics

2/ Technical Data

Technical Data: *Specifications are subject to change; consult with your sales representative for confirmation of current offering
Pilot 250Pilot 450
Build Envelope Capacity9.8 x 9.8 x 9.8 in

(250 x 250 x 250 mm)

17.7 x 17.7 x 15.7 in

(450 x 450 x 400 mm)

Maximum Part Weight38.6 Ib (17.5 kg)77.2 Ib (35 kg)
Accuracy

 

 

Part size < 1 in (25.4 mm): ±0.001 in (±0.025 mm)

Part size ≥ 1 in (25.4 mm): ±0.1% x L

(Accuracy may vary depending on parameters, part geometry and size, pre-processing or post-processing methods, materials and environment)

 

 

 

Part size < 3.9 in (100 mm): ±0.004 in (±0.1 mm)

Part size ≥ 3.9 in (100 mm):

±0.1% x L

(Accuracy may vary depending on parameters, part geometry and size, pre-processing or post-processing methods, materials and environment)

 

 

 

 

Beam SizeStandard Beam (0.12 – 0.20 mm) or Small Beam (0.06-0.08mm), optionalNominal 0.003 – 0.005 in (0.08 – 0.12m)
Scanning Speed12 m/s (Maximum); 6 – 10m/s (Typical)12 m/s (Maximum); 6 – 10m/s (Typical)
Layer Thickness0.002 in (0.05mm) minimum;

0.01 in (0.25mm) maximum

0.002 in (0.05mm) minimum;

0.01 in (0.25mm) maximum

Weight1709 Ib (775kg)

(with 106 Ib (48kg) initial fill inside)

2392 Ib (1085 kg)

(with 353 Ib (160kg) initial fill inside)

Machine Size (WxDxH)43.5 x 41.4 x 77.3 in (1105 x 1052 x 1965mm)52.4 x 53.9 x 84.3 in (1331 x 1368 x 2140mm)

 

PILOT 250/450:

LaserSolid-state frequency tripled Nd: YVO4
Wavelength355nm
ControllerUnionTech™ RSCON
Part PreparationPolyDevs or Materialise Magics
Operating SystemsWindow 7, Window 10*
Input Data File FormatSTL
Network Type and ProtocolEthernet, IEEE 802.3 using TCP/IP and NFS
Electrical Requirements200 – 240 VAC, 50-60 Hz, single phase
Laser Warranty5,000 hours or 15 months (whichever comes first)
Recoater FrameGranite
Systems controlClosed-loop
Power (nominal)Typically 250~350 mW on the target surface of the material under nominal optical path condition
Operating Environment:
Temperature Range72 – 79°F (22 – 26°C)
Maximum Change Rate1°C/hour
Relative Humidity<40% non-condensing
Accessories:
Additional Resin VatOptional
Processing and FinishingPost-Curing Unit (optional)
System WarrantyOne-year warranty (Under UnionTach Purchase Terms and Conditions)

 

Related Articles

HOTLINE: 0904825699